IDX
Endura-Batteries

ENDURA ELITE

ENDURA ELITE

Li-ion Power Cartrige V-Mount Battery with Digi-View

  • Capacity : 136Wh(14.8V/9.2Ah)
  • Typical camera run-time : 4.7 hours (@30W)
  • Dimensions : 3.94(W)x6.69(H)x2.76(D) inches
  • Weight : 2.76 lbs approx.

The ENDURA ELITE is the ideal battery for the new generation Hi-Def ENG/EFP cameras. At 136 Wh capacity, and with full air transportability compliance, the ELITE Li-ion battery offers the best power source for today's Hi-Def field operations. Its replaceable cartridge design significantly lowers the cost of ownership and improves Return on Investment. It is compatible with all existing IDX V-Mount chargers. ELITE is the battery specifically tailored for today's Hi-Def cameras. ELITE supports Digi-View and i-Trax Battery Management System.

ELITE Power Status
The ENDURA ELITE battery is uniquely designed with a 10 step remaining power indicator. The remaining power is shown in increments of 10% by full/flashing combination of the 5 LEDs. This information can be shown in the camera viewfinder via Digi-View. In addition a new mode LED shows the user preset and warning conditions of the battery.

ENDURA-10(E-10)

ENDURA-10(E-10)

Li-ion V-Mount Battery with PowerLink & Digi-View

  • Capacity : 93Wh(14.8V/6.3Ah)
  • Typical camera run-time : 3.25 hours (@30W)
  • Dimensions : 3.35(W)x5.51(H)x2.32(D) inches
  • Weight : 1.72 lbs approx

The ENDURA-10 is the highest capacity PowerLink battery. It has a capacity of 93Wh and PowerLink allows doubling capacity up to 186Wh. It has an accurate 5 LED Power Status Display and supports Digi-View and i-Trax Battery Management System.

Power Status
The ENDURA Power Status is an accurate display of the batteries remaining charge status. A six step LED status shows the remaining capacity in increments of 20% plus the last remaining 10%. This information can be shown in the camera viewfinder via Digi-View.

ENDURA-10S(E-10S)

ENDURA-10S(E-10S)

Li-ion V-Mount Battery

  • Capacity : 93Wh(14.8V/6.3Ah)
  • Typical camera run-time : 3.25 hours (@30W)
  • Dimensions : 3.35(W)x5.59(H)x1.97(D) inches
  • Weight : 1.65 lbs approx

This economical version of the ENDURA-10 provides the same power specifications of 93Wh, without PowerLink and Digi-View. It has a 3 LED Power Indicator feature

Power Indicator
The Power Indicator is a quick reference of the batteries charge state. A simple 3 LED condition indicator shows if the battery is full or requires charge. The center LED is used to indicate if the battery has been used since the previous full charge

ENDURA-7(E-7)

ENDURA-7(E-7)

Li-ion V-Mount Battery with PowerLink and Digi-View

  • Capacity : 68Wh(14.8V/4.6Ah)
  • Typical camera run-time : 2.25 hours (@30W)
  • Dimensions : 3.35(W)x5.51(H)x1.57(D) inches
  • Weight : 1.19 lbs approx

The ENDURA-7 is the compact version of the PowerLink battery. It has a capacity of 68Wh and PowerLink allows doubling of the capacity up to 136Wh. It has an accurate 5 LED Power Status Display and supports Digi-View and i-Trax Battery Management System.

Power Status
The ENDURA Power Status is an accurate display of the batteries remaining charge status. A six step LED status shows the remaining capacity in increments of 20% plus the last remaining 10%. This information can be shown in the camera viewfinder via Digi-View.

ENDURA-7S(E-7S)

ENDURA-7S(E-7S)

Li-ion V-Mount Battery

  • Capacity : 68Wh(14.8V/4.6Ah)
  • Typical camera run-time : 2.25 hours (@30W)
  • Dimensions : 3.35(W)x5.59(H)x1.32(D) inches
  • Weight : 1.15 lbs approx.

This economical version of the ENDURA-7 provides the same power specifications of 68Wh, without PowerLink and Digi-View. It has a 3 LED Power Indicator feature.

Power Indicator
The Power Indicator is a quick reference of the batteries charge state. A simple 3 LED condition indicator shows if the battery is full or requires charge. The center LED is used to indicate if the battery has been used since the previous full charge.

PowerLink

PowerLink is a unique feature of the ENDURA-10 and ENDURA-7 batteries that allows users to effectively double up on available capacity. So the ENDURA-10 outputs up to 186Wh and the ENDURA-7 can be 136Wh. This gives the flexibility to run either lightweight with only one battery when the shoot is short or to PowerLink when a long run time is needed and especially when a high load, such as with on-board lights, is used. It can also act as effective balance control if occasional use of either front end heavy mattebox or wide lens is called for. PowerLink is quick and easy to use.


NP Style Batteries

NP-L7

NP-L7

NP-Style Lithium Ion Battery w/Digi-View

  • Capacity : 68Wh(14.8V/4.6Ah)
  • Typical camera run-time : 2.25 hours (@30W)
  • Dimensions : 7.28(W)x2.83(H)x0.98(D) inches
  • Weight : 1.01 lbs approx

The lightest & most powerful NP-style Li-ion battery available, with an accurate 5 LED Power Status Display. Includes Digi-View feature and the most advanced protection and operating circuit in the industry. IDX NP Li-ion batteries can also be charged on ENDURA system V-Mount chargers using the A-E2NP charge adaptor.

NP-L7S

NP-L7

NP-Style Lithium Ion Battery

  • Capacity : 68Wh(14.8V/4.6Ah)
  • Typical camera run-time : 2.25 hours (@30W)
  • Dimensions : 7.28(W)x2.83(H)x0.98(D) inches
  • Weight : 1.01 lbs approx

The economical version of the NP-L7 battery with 3 LED Power Indicator, but no Digi-View feature. IDX NP Li-ion batteries can also be charged on ENDURA system V-Mount chargers using the A-E2NP charge adaptor.

NP-1dx

NP-1dx

32Wh NP-Style Nickel Cadmium Battery

  • Capacity : 32Wh (13.2V/2.4Ah)
  • Typical camera run-time : 1.3hours (@26W)
  • Dimensions : 7.28(W)x2.83(H)x0.98(D) inches
  • Weight : 1.63 lbs approx.

13.2V high quality NiCd battery. Built-in protection circuit (auto reset) and 3 LED Power Indicator.

NP-23dx

NP-23dx

28Wh NP-Style Nickel Cadmium Battery

  • Capacity : 28Wh (12.0V/2.4Ah)
  • Typical camera run-time : 1.1hours (@26W)
  • Dimensions : 7.28(W)x2.83(H)x0.98(D) inches
  • Weight : 1.52 lbs approx

12V high quality NiCd battery. Built-in protection circuit (auto reset) and 3 LED Power Indicator.


Endura-Chargers

VL-2PLUS

VL-2PLUS

2-Channel Sequential Quick Charger with AC Adaptor (60W)

  • Quick charge current : All ENDURA & NP-L type Li-ion batteries: 2.3A. All Ni-Cd batteries: 1.9A.
  • Input Voltage : AC100-240V 50/60Hz
  • Dimensions : 5.94(W)x3.11(H)x8.35(D) inches
  • Weight : 2.09 lbs approx
  • Compatible batteries : All IDX ENDURA System Li-ion Batteries. All IDX NP-type Li-ion/Ni-Cd batteries via A-E2NP Charge Adaptor.

The lightweight portable ENDURA System charger with built-in 60W DC power supply, it is the ideal economic V-Mount charger. Charges NP-style Ni-Cd & Li-ion batteries using optional A-E2NP.

VL-2SPLUS

VL-2SPLUS

Charger with AC Adaptor (100W)

  • Quick charge current : ENDURA ELITE / E-10 & E-10S Li-ion batteries: 1 Battery: 4A / 2 batteries: 3A. All other ENDURA & NP-L type Li-ion batteries: 3A. All Ni-Cd batteries: 2.5A
  • Input Voltage : AC100-240V 50/60Hz
  • Dimensions : 5.94(W)x3.11(H)x8.74(D) inches
  • Weight : 2.43 lbs approx
  • Compatible batteries : All IDX ENDURA System Li-ion Batteries. All IDX NP-type Li-ion/Ni-Cd batteries via A-E2NP Charge Adaptor.

The VL-2SPLUS is a 2-ch simultaneous V-Mount charger with built-in 100W DC power supply. It also offers the new IDX PowerBase mode which provides battery powered DC when an AC feed is not available. Charges NP-style Ni-Cd & Li-ion batteries using optional A-E2NP.

VL-4S

VL-4S

Charger

  • Quick charge current : All ENDURA & NP-L type Li-ion batteries: 3.0A(Li-ion) when up to 3Ch's are charging, 2.3A(Li-ion) when all 4Ch's are charging. All Ni-Cd batteries: 1.9A
  • Input Voltage : AC100-240V 50/60Hz
  • Dimensions : 6.14(W)x6.02(H)x11.34(D) inches
  • Weight : 6.83 lbs approx
  • Compatible batteries : All IDX ENDURA System Li-ion Batteries. All IDX NP-type Li-ion/Ni-Cd batteries via A-E2NP Charge Adaptor

High-speed 4-channel, simultaneous charger. It is the workhorse charger for professional production for fast battery turnaround. NP-style batteries may be charged by using the A-E2NP adaptor.

VL-4Si

VL-4Si

4-Channel Fully Simultaneous Quick Charger with Intelligent Display

  • Quick charge current : All ENDURA & NP-L type Li-ion batteries: 3.0A(Li-ion) when up to 3Ch's are charging, 2.3A(Li-ion) when all 4Ch's are charging. All Ni-Cd batteries: 1.9A
  • Input Voltage : AC100-240V 50/60Hz
  • Dimensions : 6.14(W)x6.02(H)x11.34(D) inches
  • Weight : 7.05 lbs approx
  • Compatible batteries : All IDX ENDURA System Li-ion Batteries. All IDX NP-type Li-ion/Ni-Cd batteries via A-E2NP Charge Adaptor.

This advanced charger is an enhanced version of the VL-4S. Advance features include a LCD display to monitor batteries data and direct PC interface using a USB cable.

VAL-4Si

VAL-4Si

(Special Order Item)
8-Channel (4+4) Fully Simultaneous, Quick Charger with Intelligent Display and Discharge

  • Quick charge current : All ENDURA & NP-L type Li-ion batteries: 3.0A(Li-ion) when up to 3Ch's are charging, 2.3A(Li-ion) when all 4Ch's are charging. All Ni-Cd batteries: 1.9A
  • Input Voltage : AC100-240V 50/60Hz
  • Dimensions : 6.30(W)x7.87(H)x11.34(D) inches
  • Weight : 9.70 lbs approx
  • Compatible batteries : All IDX ENDURA System Li-ion Batteries. All IDX NP-type Li-ion/Ni-Cd batteries via A-E2NP Charge Adaptor. All IDX BP-type Ni-Cd & Ni-MH batteries.

VAL-4Si supports the same features as the VL-4Si as well as complete i-Trax battery management system capability with discharge for full battery analysis. Additionally a 4-Channel charging base provides an economical route to eight battery charging.

C-VAL2E

C-VAL2E

(4 cables included)
Charge Cable Adaptor for VAL-4Si Charger

  • Dimensions : Cable approx 11.81 inch
  • Weight : 0.13 lbs approx

Cable adaptor to charge extra ENDURA batteries on the VAL-4Si charger.

BMS

i-Trax ENDURA Battery Management System is a hardware/software solution which provides detailed data information from ENDURA System Lithium Ion batteries. Each ENDURA BMS Compatible battery features IDX's exclusive Digital Data Protocol which stores, in non-volatile memory, the most complete battery usage information available. The BMS software records the batteries data into a database and displays information such as charge cycles, discharge cycles, operating temperatures, high loads and more. Users can manipulate and manage the data to increase the life of their battery system.

i-Trax Compatible Chargers
VL-4Si, VAL-4Si
i-Trax Compatible Batteries
ENDURA ELITE, ENDURA-10, ENDURA-7


NP Style Charger

JL-2PLUS

JL-2PLUS

2-Channel Sequential NP Quick Charger with AC Adaptor (60W)

  • Quick charge current : All IDX NP-L (& ENDURA) type Li-ion batteries: 2.3A. All IDX Ni-Cd batteries: 1.9A.
  • Charge time : See reference Chart page 14
  • Input Voltage : AC100-240V 50/60Hz
  • Dimensions : 5.94(W)x2.76(H)x8.35(D) inches
  • Weight : 1.76 lbs approx
  • Compatible batteries : All IDX NP-Type Li-ion/Ni-Cd batteries (All IDX ENDURA System Li-ion Batteries via C-NP2E Charge Adaptor)

Sequential 2-Channel charger for Li-ion and Ni-Cd NP batteries in any combination, with a 60W DC 13.8v XLR power supply.


Accessories

V-Plate

P-V2
ENDURA V-Mount Plate w/2 Pin D-Tap DC out & Digi-View

P-VS2
ENDURA V-Mount Plate w/2 Pin D-Tap DC out Digi-View & Syncron

A-AB2E
Adaptor Bracket to fit ENDURA batteries to 3-Stud mount

A-E2DT
V-Mount to V-Mount Camera Adaptor with 2 Pin D-Tap DC out

Wireless Adaptors

A-EWR
Wireless Receiver Mounting Bracket

A-LWR
Wireless Receiver Mounting Bracket

A-SWR
Wireless Receiver Mounting Bracket

A-UWR
Wireless Receiver Mounting Bracket

Different Accessories

C-EB(XLR)
ENDURA Power Adaptor

SD-1E
ENDURA Power Unit - 7.2V/12V Output

A-E2NP
Adaptor to charge NP-battery on ENDURA Chargers

C-NP2E
Adaptor to charge ENDURA batteries on IDX NP Chargers

A-E2H1
V-Mount Camera Adaptor for Canon® Cameras

A-E2P2
ENDURA V-Mount Adaptor for Panasonic HD P2 Mobile Recorder

A-E2LCD
ENDURA V-Mount Adaptor for LCD monitor

V-Mount Power Supply

AC-100
100W V-Mount Camera AC Adaptor

NP Style Holders

NH-100
Single NP Battery Holder

NH-100V
Single NP Battery Holder with V-Mount style adaptor and DigiView

NH-100AB
Single NP Battery Holder with 3-stud style adaptor plate

NH-201
Dual NP Battery Holder with Digi-View

NH-201V
Dual NP Battery Holder with V-Mount, 2-pin power tap and DigiView

NH-201AB
Dual NP Battery Holder with 3-stud style adaptor plate

NH-202
Dual NP Battery Holder with 2 Pin D-Tap DC output with Digi-View and Syncron

NH-204
Dual NP Battery Holder with 4 Pin XLR DC output with Digi-View and Syncron


 
Video
Audio
Broadcast & Communication
Automation
Graphics & Virtual Studios
Telecine
Cameraman Equipment
   Reporter Lighting
   Peripherals
     Sony
     Anton Bauer
     IDX
          Endura-Batteries
          NP Style Batteries
          Endura-Chargers
          NP Style Charger
          Accessories
   Tripods
   Pedestals
   Steadicams
   Cranes
   Dollies
   Bags / Cases / Rain Covers
Lenses
Lighting
RF
Test / Monitoring / Measurement
OBvans & Flight Cases