The Anton/Bauer ULTRALIGHT is the first and only camera mounted light designed specifically to work with any available light to create truly studio quality images. Virtually all interior locations are lit totally from above which creates objectionable shadows on the foreground subjects making it impossible to achieve professional quality video. Studio lighting, on the other hand, is a careful blend of light from above and light from the front that eliminates these shadows. The unique and innovative design features of the Ultralight create studio quality images under virtually all available light conditions. Equally impressive to the cameraman, the Ultralight achieves this vast improvement in visual quality without adding any perceptible weight, bulk, or external cables.

Ultralight 2

The Ultralight 2 is designed specifically for camera mounting. This compact super-lightweight (only 10 oz., 284g.) version of the Anton/Bauer Ultralight features a universal mounting system 1/4-20 or shoe-type mounting - eliminating the need for special studs or adapters. With the head module removed, the Ultralight 2 can be folded into itself like a pocket knife and practically disappears into the camera handle. Unlike any other light, the Ultralight 2 can remain mounted and connected to the camera at all times, even when the camera is in the case.
The integral PowerTap cable plugs directly into the PowerTap receptacle on all Gold Mounts  to share power with the camera from a single battery. The Ultralight 2 comes complete with a universal mounting system, one head module, one AB-60 bulb (25 watt 60 degree beam bulb), and integral PowerTap cable.
UL2-6. Ultralight 2 camera mounted light with integral 6" PowerTap cable. For use with Sony cameras with built in PowerTap. Comes standard with diffused glass.
UL2-20. Ultralight 2 camera mounted light with integral 20" PowerTap cable. Fits most one piece camcorders. Comes standard with diffused glass.
UL2-L. Ultralight 2 camera mounted light with integral 42" PowerTap cable. For larger camcorders, dockable camera/VTR setups and for use with XL wedge and UL-2 wedge mounts. Comes standard with diffused glass.

UltraDAYlight

With UltraDAYlight the high efficiency of HMI lighting can be added to any Ultralight system by simply changing head modules - a patented Ultralight exclusive.
The UltraDAYlight head module fits any Ultralight base to instantly deliver 5600°K light at less than half the power required of tungsten/halogen - without the need for dichroic adaptors.  Uniquely designed to share power from camera battery using the PowerTap on every camera Gold Mount.  Instantly change from daylight to tungsten and back by swapping head modules - no twisting, turning or handling of bulbs.  And since the rugged Ultralight head modules house and protect the bulbs, they can be stored in the head module until next use.
The UltraDAYlight head module is a unit - 25 watt bulb and ballast all in one.  Perfect for daylight fill situations, the UltraDAYlight can be converted to tungsten with the UL-GF and UL-GELKIT (not included).  UltraDAYlight also features a unique color temperature adjustment which allows the ballast to adjust the color temperature of the light, compensating for bulb variations and aging.  Specifications: 5600K nominal color temperature.  350 footcandles at 3 ft (1m), 25 watt ballast.
UltraDAYlight Head Module. Size: 5.60" x 2.62" x 2.22" (14.22 x 5.92 x 6.65cm), weight: 13oz., (380g)

Ultralight Dimmer

This UltraLight accessory allows the adjustment of light output from 0-100%. It's microprocessor controlled PWM (pulse-width modulation) circuit minimizes power loss and is designed to be used with any UltraLight in the field. With the push of a button, a low and a high output setting can be pre-programmed anywhere between 0 and 100%. With this feature, quick and exact light settings can be established before the shot allowing for quick light transitions without fumbling or need to "dial-it-in". UL-Dimmer fits any camera with a universal ј-20 or standard shoe type mount. Fitting underneath the light its innovative bevel design provides for additional down angle of the light while moving the light forward to avoid lens shadows. UL dimmer is fully compatible with the Automatique feature standard in most Gold Mounts and has an auto shut off in the case of a low voltage battery. (Not for use with UltraDAYlight head.) 4 5/8"L x 1 7/16"W x 1"H, 5.6 oz. (11.8L x 3.7W x 2.5H cm, 160g)

Ultralight Original

The original Ultralight is available in a single head with a standard 5/8" stud mounting which makes it ideal for a wide variety of applications in addition to camera mounting. The original Ultralight also features a choice of power sources: 12-14 volt and 30 volt. The integral 4 pin connector accepts a variety of power cables which must be ordered separately (see power cables). The UL-S is available separately or in complete lighting kits.
ULS -Ultralight Single. Single base with 4 pin XLR input and head module. Includes one AB-60 (25 watt, 60° flood) bulb. Comes standard with diffused glass.

Ultrakits

• One UL-S as described under Original Ultralight.
•PowerStrap 13 battery belt: 13.2 volts 55 WH (fast charge compatible)
• 5 foot Power Cable (LC-L) Power Strap 13 to Ultralight,
• AB-60 25 watt flood
• Heavy-duty shipping/carrying case with custom cut foam interior.

Note: Chargers, Filters, focus adapters, spare head modules, handles and mounting studs must be purchased separately.

Ultrakit 30-S -"30 volt Ultralight Single Kit"

• One UL-S as described under Original Ultralight.
• 30/13 Battery Belt : 30 volt, 120 WH (switchable to 13.5 volts)
• 5 foot Power Cable (LC-30) 30/13 Battery Belt to Ultralight
• ULWA Wide Angle Adapter
• Bulb (EKP/ENA) 80 watt flood
• Heavy-duty shipping/carrying case with custom cut foam interior.

Note:Filters, focus adapters, spare head modules, handles and mounting studs must be purchased separately.

Accessories: >>>